manualshive.com logo in svg

Allied Guppy, Technical Manual, Page: 91 / 238

Share
Download
Allied Guppy Technical Manual Download Page 91

Description of the data path

 GUPPY Technical Manual

 

V4.0.1

91

HDR (high dynamic range) (GUPPY F-036 only)

The HDR mode is available for the 

GUPPY F-036

 cameras with the Micron 

MT9V022 sensor. (

HDR 

=

 h

igh 

d

ynamic 

r

ange)

Advanced registers for high dynamic range 
mode (HDR) (GUPPY F-036 only)

The 

GUPPY F-036

 cameras offer the so-called high dynamic range mode (HDR 

mode) with one or two knee points.

Register

Name

Field

Bit

Description

0xF1000280

HDR_CONTROL

Presence_Inq

[0]

Indicates presence of this feature 
(read only)

---

[1..5]

Reserved

ON_OFF

[6]

Enable/disable HDR mode

---

[7..19]

Reserved

MaxKneePoints

[20..23]

Read only

Maximum number of knee points (2)

---

[24..27]

Reserved

KneePoints

[28..31]

Number of active knee points
(max. 2)

0xF1000284

KNEEPOINT_1

KneeVoltage_1

[0..7]

Regulation of saturation level

KneeVoltage_2

[8..15]

Regulation of saturation level

KneeTime_1

[16..31]

Not implemented, but value must be 
greater 0

0xF1000288

KNEEPOINT_2

KneeVoltage_3

[0..7]

Regulation of saturation level

KneeVoltage_4

[8..15]

Regulation of saturation level

KneeTime_2

[16..31]

Not implemented, but value must be 
greater 0.

0xF100028C

KNEEPOINT_3

---

[0..31]

Reserved

 Table 30: High dynamic range (HDR) configuration register

Note

L

The HDR mode of 

GUPPY F-036

 runs in 

auto exposure mode

 

only.

The knee times are calculated by the sensor automatically.

Summary of Contents for Guppy















































































































































































































































Reviews:

No comments