manualshive.com logo in svg

Allied Guppy, Technical Manual, Page: 207 / 238

Share
Download
Allied Guppy Technical Manual Download Page 207

Configuration of the camera

 GUPPY Technical Manual

 

V4.0.1

207

To store the current camera settings into a profile:

1.

Write the desired 

ProfileID

 with the 

SaveProfile

 flag set

2.

Read back the register and check the 

ErrorCode

 field

To restore the settings from a previous stored profile:

1.

Write the desired 

ProfileID

 with the 

RestoreProfile

 flag set

2.

Read back the register and check the 

ErrorCode

 field

To set the default profile to be loaded on startup, reset or initialization:

1.

Write the desired 

ProfileID

 with the 

SetDefaultID

 flag set

2.

Read back the register and check the 

ErrorCode

 field

To go back to the factory default profile:

1.

Select ProfileID= 0 and toggle the 

SetDefaultID

 flag set

2.

Read back the register and check the 

ErrorCode

 field

Error codes

Reset of error codes

The 

ErrorCode

 field is set to zero on the next write access.

You may also reset the 

ErrorCode

•

by  writing  to  the 

USER_PROFILE

 register with the 

SaveProfile

, 

RestoreProfile

 and 

SetDefaultID

 flag not set.

•

by writing 00000000h to the 

USER_PROFILE 

register.

ErrorCode #

Description

0x00

No error

0x01

Profile data corrupted

0x02

Camera not idle during restore operation

0x03

Feature not available (feature not present)

0x04

Profile does not exist

0x05

ProfileID out of range

0x06

Restoring the default profile failed

0x07

Loading LUT data failed

0x08

Storing LUT data failed

 Table 109: User profile: Error codes

Summary of Contents for Guppy















































































































































































































































Reviews:

No comments