Allied Guppy Technical Manual Download Page 110

Page: 110 / 238

Camera interfaces

GUPPY Technical Manual

V4.0.1

110

In addition, the cameras have an advanced register which allows even more
precise delay of image capture after receiving a hardware trigger.

Trigger delay advanced register

The advanced register allows the start of the integration to be delayed by
max. 2

µs, which is max. 2.1 s after a trigger edge was detected.

Register

Name

Field

Bit

Description

0xF0F00834

TRIGGER_DELAY

Presence_Inq

[0]

Presence of this feature:

0: Not available

1: Available

Abs_Control

[1]

Absolute value control

O: Control with value in the
value field

1: Control with value in the
absolute value CSR If this
bit= 1 the value in the
value field has to be
ignored

[2..5]

Reserved

ON_OFF

[6]

Write ON or OFF this fea-
ture, ON=1 Read: Status of
the feature; OFF=0

[7..19]

Reserved

Value

[20..31]

Value

Table 42: Trigger Delay CSR

Register

Name

Field

Bit

Description

0xF1000400

TRIGGER_DELAY

Presence_Inq

[0]

Indicates presence of this
feature (read only)

---

[1..5]

ON_OFF

[6]

Trigger delay on/off

---

[7..10]

DelayTime

[11..31]

Delay time in µs

Table 43: Trigger Delay Advanced CSR

Summary of Contents for Guppy















































































































































































































































Search results

Summary of Contents for Guppy

Reviews:

Allied Guppy, Technical Manual, Page: 110 / 238

Search results

Summary of Contents for Guppy

Reviews: