Allied Guppy Technical Manual Download Page 109

Page: 109 / 238

Camera interfaces

GUPPY Technical Manual

V4.0.1

109

Register

Name

Field

Bit

Description

0xF0F00534

TRIGGER_DELAY_INQUIRY Presence_Inq

[0]

Indicates presence of this
feature (read only)

Abs_Control_Inq

[1]

Capability of control with
absolute value

[2]

Reserved

One_Push_Inq

[3]

One-push auto mode (Con-
trolled automatically by the
camera once)

Readout_Inq

[4]

Capability of reading out the
value of this feature

ON_OFF

[5]

Capability of switching this
feature ON and OFF

Auto_Inq

[6]

Auto Mode (Controlled auto-
matically by the camera)

Manual_Inq

[7]

Manual Mode (Controlled by
user)

Min_Value

[8..19]

Min. value for this feature

Max_Value

[20..31] Max. value for this feature

Table 41: Trigger_Delay_Inquiry register

Summary of Contents for Guppy















































































































































































































































Search results

Summary of Contents for Guppy

Reviews:

Allied Guppy, Technical Manual, Page: 109 / 238

Search results

Summary of Contents for Guppy

Reviews: