Allied Telesis AT-DC2552XS, Installation Manual, Page: 18 / 96

Chapter 1: Overview
18
Optional QSFP+ Transceivers
The following QSFP+ transceivers direct attach cable assemblies have
been approved by Allied Telesis and may be installed in the
AT-DC2552XS / L3 chassis:
Note
The QSFP+ transceivers and direct attach cable assemblies are
sold separately from the AT-DC2552XS / L3 Enterprise Core Switch.
Contact your local Allied Telesis representative for more information.

AT-QSFPSR (40GBASE-SR4 (MPO))

QSFP+ Direct Attach Cables
-
AT-QSFP1CU (QSFP + Direct Attach Cable (1m))
- AT-QSFP3CU (QSFP + Direct Attach Cable (3m))

Fiber-Optic Cable for AT-QSFPSR
-
ET3-MPO12-1 (1m)
- ET3-MPO12-5 (5m)
Management Software and Interfaces
Here are the management software and the management interfaces:

AlliedWare Plus Management Software

Command line interface

SNMP V1, V2 and V3
Note
Refer to the AT-DC2552XS / L3 Management Software Command
Line Interface User’s Guide for information concerning specific
commands.
Management Methods
Here are the methods for managing the switches:

Local management through the Console port

Telnet client on a network or NET MGMT port

Secure Shell with telnet client on a network (SSH) port

SNMPv1, v2c, and v3 on a network or NET MGMT port