Allied Telesis AT-ANC10S/4, Installation Manual

Page: 92 / 130

Chapter 8: Installing Management Applications
92
 “Performing a Silent Install from Within a Batch File” on page 93
Note
All commands are case sensitive.
Note
User must “Run as Administrator” for Vista when using “msiexec” for
“silent” install/uninstall(s).
Performing a Silent Install from the Installer Source Folder
To perform a silent install (or upgrade) from within the installer source
folder, enter:
setup /s /v/qn
If performing a silent upgrade, your system may reboot automatically. To
suppress the reboot, enter:
setup /s /v"/qn REBOOT=ReallySuppress"
Performing a Silent Install and Creating a Log File
To perform a silent install and create a log file, enter:
setup /s /v"/qn /L f:\ia32\1testlog.txt"
The 1testlog.txt log file is created at f:\ia32.
Performing a Silent Install from any Folder
To perform a silent uninstall from any folder on the hard drive, enter:
msiexec /x "{26E1BFB0-E87E-4696-9F89-B467F01F81E5}" /
qn
Note
The hexadecimal number above may differ from your current
installer. Check the Key name corresponding with the Broadcom
Advanced Control Suite 4(BACS) application in
HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall for the
correct hexadecimal number.