Unpacking
Machines without Front Tilting
To unpack the machine, carry out the sequence of steps, refer to
.
Unpacking Steps - Machines without Front Tilting
CZW35NB
A
C
D
E
B
A - Step 1
B - Step 2
C - Step 3
D - Step 4
E - Step 5
Figure 9
1. After unpacking, check if the machine has not been damaged
and if all the accessories are included according to your order.
2. Verify the type of your machine by its serial plate and find the
corresponding information in the manual. The accessories are
delivered inside the machine drum. Refer to
Door Lock in Case of Emergency
.
3. Remove four nuts M10 from the front and rear part of the pal-
let. Remove both connecting beams of the pallet. Remove the
front cover of the machine. Use the room between both the
halves of the pallet for a hand pallet truck.
4. Handle the machine with a forklift or with a hand pallet truck.
Make sure the fork does not damage components located in
the lower section of the machine. The lift truck or hand pallet
truck forks must be at least 3.94 in. [10 cm] longer than the
length of the washing machine frame, refer to
. Lift
up the machine carefully, loosen the four nuts M16 and re-
move the rests of the pallet.
5. Position the machine in the prepared place.
Machines with Front Tilting
To unpack the machine, carry out the sequence of steps, refer to
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
26
Part No. D2601EN
Summary of Contents for UY350 PROFORM TOUCH
Page 2: ......
