Alliance Laundry Systems UY350 PROFORM TOUCH, Installation Operation & Maintenance

Page: 56 / 63

35 - 60 kg / 350 - 600 L Models
Bolt (Nut)
Dimen-
sion
Number
of Pcs.
Torque,
lbf.ft [Nm]
A - hub flange
bolts M20x65 24 (12) 420 [570]
B - bolts fix-
ing the pulley
to the nut of
clamping
sleeve 45 - 60 kg /
450 - 600 L
Models only:
M12 x 30 8 52 [70]
B - bolt fixing
the pulley 35 kg / 350 L
Models only:
M20 x 60 1 33.2 [45]
C - bolts fix-
ing the motor
plate to the
external drum M12 x 35 4 52 [70]
D - bolts fix-
ing the inner
drum to the
shaft M30 x 80 1 590 [800]
E - bolts fix-
ing the door
brackets M12 x 38 4 18.5 [25]
Table 28
Every 6 Months or 1000 Working Hours
1. Clean water and steam filters (if present).
• Stop the water or steam inlet to the machine.
WARNING
Before you start the filter cleaning process,
make sure the hot water (steam) inlet is closed
and cold.
C217
• Unscrew the filter plug and remove the filter sieve, refer
to Figure 44 .
Water Filter
1. Filter body
2. Filter sieve
3. Gasket
4. Plug
Figure 44
• Clean the sieve with running water or compressed air.
• Put the sieve and gasket back to the filter body and tighten
the plug.
2. Grease spring suspension eyes, guiding rods, the door handle
casing and the casings in the door hinge.
3. Clean and remove dirt and dust from:
• the cooling fin of the inverter
• the motor cooling fins
• the internal ventilator of the inverter (if present)
• the external ventilator (if present)
• the external air relieves of the machine
4. Check if ventilator in coolfins of inverter (if present) is func-
tional.
5. Check if external ventilator (if present) is functional.
6. Check the tightening and fixing of all electrical terminals.
• Check the conductors and insulating materials for corro-
sion and damage.
• Measure insulation resistance.
7. Remove the rear machine cover and check the condition and
tightness of the belts.
• Apply a load at the middle of the belt. Refer to
Table 29 .
• For testing force of belt tensioning refer to Figure 44 .
Maintenance
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
56 Part No. D2601EN