45 - 60 kg / 450 - 600 L Models outside of North
America with Forward Tilting and with Weighing Sys-
tem - Drilling Points for Anchoring Bolts
1
A
C
B
D
CZW12N
E
F
s
1.
Anchoring bolt (supplied with the machine)
Figure 15
Machine Anchoring with Forward Tilting and
with Weighing System
Machine 45 - 60 kg / 450 - 600 L
Specification
Requirement, in.
[mm]
A
4.55 [115.5]
B
0.59 [15]
C
5.51 [140]
D
27.26 [692.5]
E
0.59 [15]
F
9.65 [245]
Table 14
2. Remove the upper nut and washer from the anchor bolt.
3. Place the anchor bolt into the pre-drilled hole and place the
machine in position (the bolt goes through the air spring
plate).
4. Attach the washer and nut back again and tighten.
5. The front feet of the machine with tilting and weighing sys-
tem are interconnected with the air spring by means of con-
necting rods. During the transport, these rods are disconnec-
ted from the air spring and the rods are turned upwards and
secured to the frame. Before you install the machine in place,
release these connecting rods and connect them with the air
spring, refer to
and
Connection of Rods
1
1
1.
0.35 in. [9 mm]
Figure 16
Connection of Rods with Air Spring
1
2
CZW30N
1.
Connecting rods
2.
Transport feet
Figure 17
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
30
Part No. D2601EN
Summary of Contents for UY350 PROFORM TOUCH
Page 2: ......
