Installation
Handling Transport and Storage
Transport and Storage
WARNING
Forks of lift truck must have sufficient length.
W920
Use a lift truck or a manual skid cart for handling with the ma-
chine in transporting package. If possible, leave the machine in
the transporting package or at least let it set on the transporting
wooden skid until the time of final installation on the foundation
according to instructions.
Minimum Length “X” of Lift Truck Forks
Figure 8
Minimum Length of Lift Truck Forks
Machine kg / L
35 - 45 - 60 / 350 - 450 -
600
X
59 in. [1500 mm]
Table 10
Handling During Installation
All activities can be done only by qualified personnel. Machine is
delivered to the customer in wooden packing or a wooden crate,
and protected with polyethylene film. The machine is attached to
the skid by means of four bolts.
To remove the machine to its final position follow these precau-
tions:
1. All passages and spaces the machine has to be transported
through at installation should be reasonably dimensioned to
meet the height and width of the machine including the pack-
age.
CAUTION
Never push, pull or press the components protrud-
ing from the contour line of machine (front part of
the machine, filling door, control elements, belt cov-
er, water inlet and outlet pipes etc.).
MAKE SURE THAT THESE COMPONENTS ARE SE-
CURED SO AS TO AVOID THEIR DAMAGE DURING
HANDLING AND INSTALLATION OF THE MACHINE.
NOTE: Make sure that the filling doors are secured to
avoid its opening during the handling.
Lift the machine up by the fork-lift or by pallet trucks using a
transport skid to which the machine has been attached.
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
25
Part No. D2601EN
Summary of Contents for UY350 PROFORM TOUCH
Page 2: ......
