Securing the cabinet for 45 - 60 kg / 450
- 600 L machines with tilting system
and weighing system
To secure and stabilize the cabinet on 45 - 60 kg / 450 - 600 L
machines that include a tilting system and weighing system, in-
stall the cabinet brackets (pos. 2) onto the machines’ front feet
and attach them to the cabinet using screws (pos. 1). Refer to
1
2
CZW191N
1.
Screw
2.
Bracket
Figure 18
Weighing System Installation - Models
Outside of North America
1. Lift up the machine.
2. Remove four transport washers, refer to
Removing of Transport Washers
CZW13NA
1.
Load sensor
2.
Washer
3.
Washer
4.
Bolt
5.
Foot
6.
Nut
Figure 19
3. Check that all the rubber feet with load sensors are correctly
placed on the machine frame and tightened.
4. Place the machine in the required position carefully so that it
is not subjected to any impact or shock.
NOTE: An impact might cause permanent damage
to the load sensors.
5. Check that all the rubber leveling legs of the load sensors are
stable.
6. Remove the transport safety devices (transport props).
7. Use a water-level to check that the lower frame of machine is
positioned totally level.
8. Attach hoses for water supply to the machine.
NOTE: The machine is not anchored into the floor; it
stands on the load sensor feet. Take into considera-
tion that the entire machine acts as a measuring
gauge. Therefore, anything that you place on to the
machine or anything that is in physical contact with
it influences the weighing process. Make sure that
the water connection, as regards the pressure in the
hoses, does not interfere with the weighing. The ho-
ses must no pull or push the machine in any direc-
tion or prop it up in any way.
Installation
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
31
Part No. D2601EN
Summary of Contents for UY350 PROFORM TOUCH
Page 2: ......
