Alliance Laundry Systems HTE517, Programming Manual

Page: 79 / 79

800000
77
Section XVI
Default Washer Settings
Default Settings Default Cycle
The cycle listed is the default cycle programmed in at
the factory. This cycle can be made longer or shorter
by setting the fills and rinses at different variables.
Refer to the Programming section to change these
times.
Cycle PERM PRESS
Wash Water Temperature WARM
Rinse Water Temperature COLD
Special Vends OFF. All items zero.
Signals:
Keypress
End of Cycle
Coin Drop ON (at low volume)
OFF
OFF
Coin Value .25
Power Fail Reset OFF/5 minutes
Control Configuration:
Daylight Savings
Wash Temp Indicator
Infra-red Access
Decimal Point
Heater Enable ON
ON
ON
ON
OFF
Cycle Default
Fill/Agitate 1:00
Agitate 7:00
Pause/Pump 2:00
Fill/Agitate 1:00
Agitate 2:00
Tumble/Pump 1:00
Spin/Pump 2:00
Extra Fill/Agitate 0:00
Extra Agitate 0:00
Extra Tumble/Pump 0:00
Extra Spin/Pump 0:00
Fill/Agitate 1:00
Agitate 2:00
Tumble/Pump 1:00
Spin/Pump 3:00
Spin/Pump 2:00
Final Spin 7:00
Breakaway 1:00