Alliance Laundry Systems HTE517, Programming Manual

Page: 49 / 79

800000
47
24. Default Cycle Select “dCS”
This option allows the user to set the default cycle the
machine will enter when in the default mode. When
programming the default cycle, refer to Chart 3 on the
following page.
How to Program the Default Cycle
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 73.
3. Press the DELICATES (+) pad or the COLD (–)
pad to scroll through the programmable options
until
“dCS”
appears in the VFD. See Figure 74.
4. When
“dCS”
appears in the VFD, press the PERM
PRESS pad. A three digit number will appear in the
VFD.
NOTE: The number appearing in the VFD is the
current number that was previously selected from
Chart 3 on the following page. DO NOT select any
number that is not listed in Chart 3.
5. Press the DELICATES (+) or the COLD (–) keypad
to increase or decrease the current number to the
desired number selected from Chart 3. See
Figure 75.
6. Press the PERM PRESS (enter) keypad when the
correct three digit number appears in the VFD. The
next option,
“rPF”
, will appear in the VFD.
NOTE: To program “rPF” (Reset after a Power
Failure), see option 25. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. The control will revert back to
the default mode. See Figure 2.
Figure 73
Figure 74
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C126IE1A
Figure 75
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A