Alliance Laundry Systems HTE517, Programming Manual

Page: 14 / 79

12
800000
NOTE: Refer to “Programming the Electronic
Control,” Section VIII, to program signal options.
Changing Cycles
Cycles and wash temperatures can be changed anytime
during the first fill cycle. After the first fill cycle, all
key presses are ignored.
Selecting a higher priced wash temperature will stop
the first fill cycle, and INSERT COINS will flash one
(1) second on and one (1) second off until the vend
price has been satisfied. After the vend price has been
satisfied, the cycle will restart with the new wash
temperature. If the vend price is not satisfied within
one (1) minute, the washer control will go back to the
previously set wash temperature.