Alliance Laundry Systems HTE517, Programming Manual

Page: 25 / 79

800000
23
3. Warm Wash Number of Coins
“AnC”
This option allows the user to set the vend price for a
warm wash. This vend price will be displayed in the
VFD when WARM is selected.
How to Program the Warm Wash
1. Control must be in Special Mode. Refer to Section
VII.
2. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. Programmable option number
one,
“SIg”
, will appear in the VFD. See Figure 10.
3. Press the DELICATES (+) pad or the COLD (–)
pad to scroll through the programmable options
until
“AnC”
appears in the VFD. See Figure 11.
4. When
“AnC”
appears in the VFD, press the PERM
PRESS pad. The current number of coins required
to fulfill the Warm Wash Vend Price will appear in
the VFD.
5. Press the DELICATES (+) or the COLD (–) keypad
to increase or decrease the current number of coins
displayed in the VFD to the desired number of
coins. See Figure 12.
6. Press the PERM PRESS (enter) keypad when the
correct three digit number appears in the VFD. The
next option,
“dnC”
, will appear in the VFD.
NOTE: To program “dnC” (Cold Wash Number of
Coins), see option 4. To program other options,
refer to the appropriate section.
How to Exit Programming Feature
1. Be sure service door has been opened and closed.
Refer to Section VI.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the PERM PRESS
keypad with one hand, press the COLD keypad
with the other hand. The control will revert back to
the default mode. See Figure 2.
Figure 10
Figure 11
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C105IE1A
WASH RINSE SOAK
SPIN
PRICE TIME REMAINING
INSERT COINS UNBALANCE
C108IE1A
Figure 12
NORMAL
HOT
DELICATES
COLD
PERM
PRESS
WARM
Press this pad (enter)
to choose a selected
value or option
Press this pad (+)
to scroll forward or
increase a value
Press this pad (-)
to scroll back or
decrease a value
C106IE1A