Alliance Laundry Systems HTE517, Programming Manual

Page: 9 / 79

800000
7
Section II
Electronic Control Identification
Select Cycle Pads
(See
Figure 1)
SELECT CYCLE pads are used to select the specific
washer cycle. These pads include NORMAL, PERM
PRESS, and DELICATES. These pads allow the user
to select a cycle other than the default cycle (PERM
PRESS). The SELECT CYCLE keypads are active
only during the first fill cycle of the washer. The
selected cycle is indicated by the light (LED) flashing
on the pad. Pressing the flashing pad a second time
will confirm the selection and the cycle will begin.
Select Wash Temp Pads
(See
Figure 1)
SELECT WASH TEMP pads are used to select the
temperature of the water used for the wash fill. These
pads include HOT, WARM, and COLD. These pads
allow the user to select a water temperature other than
the default setting (WARM). The SELECT WASH
TEMP pads are active only during the first fill cycle of
the washer. The selected temperature is indicated by
the light (LED) on the pad.
Both the WASH TEMP pads and the SELECT
CYCLE pads are used in various combinations for
programming cycles, retrieving audit information,
running diagnostic tests, and other hidden operations.
These instructions cover the manual programming and
data retrieval options.
Electronic Control
Figure 1
Status Words
Three 7-Segment
Digits
SELECT CYCLE
pads (top row)
SELECT WASH TEMP
pads (bottom row)
C744IE3A
VFD Display
LED Light