Alliance Laundry Systems HTE517, Programming Manual

Page: 66 / 79

64
800000
2. Once the desired option appears in the VFD, press
the PERM PRESS (enter) keypad once to start the
audit count. At this point, the display will show the
first three-digit segment of the audit value. Press
the PERM PRESS pad additional times to view the
entire number.
NOTE: The VFD can display up to 3 digits at one
time. Audit counts higher than 3 digits are
separated into 3-number segments. Each time the
PERM PRESS (enter) pad is pressed in step 2, the
VFD will show the next three-digit segment in the
audit value.
For Example: In the Total Number of Coins option
with
“CnS”
displayed in the VFD, the audit has
counted 10,009 coins. Pressing the PERM PRESS pad
one time will show (000),010,009 - which means no
millions. Pressing PERM PRESS a second time will
display 000,(010),009- meaning ten thousand.
Pressing PERM PRESS a third time will display
000,010,(009) - meaning nine. The total =
000,010,009 or 10,009.
3. Press the PERM PRESS (enter) pad again. The
control will go to the next audit option in the Audit
Options List.
4.To select other audit options, repeat steps 1-4.
How to Exit Audit Feature
1. Make sure service door is open.
2. Be sure the control shows a programmable option,
not a value.
3. While pressing and holding the NORMAL keypad
with one hand, press the DELICATES keypad with
the other hand. The control will return to the
default mode. See Figure 2.