Alliance Laundry Systems HTE517, Programming Manual

Page: 56 / 79

54
800000
Configuration Programming
Use the chart on the following page (Chart 5) to turn
on or turn off the preprogrammed daylight savings
option, wash temperature, infra-red access option,
decimal point option and the automatic collect option
in the Electronic Control.
To change any or all of these configuration options,
review the following descriptions carefully and choose
the appropriate configuration value from Chart 5.
Enter the appropriate value in step 6 on the previous
page.
Daylight Savings This option automatically sets the clock in the Electronic Control to account for the time
change during Daylight Savings.
OFF= Turns off the automatic daylight savings option programmed in the Electronic
Control.
ON= Turns on the automatic daylight savings option programmed in the Electronic Control.
Wash Temperature This option determines if the temperature LEDs indicate the selected wash temperature
during the entire cycle or indicates fill temperature during each rinse. If this option is on, the
LEDs will only turn on during all fill/agitate steps to indicate the temperature of water used
during that fill. During all other steps the LEDs will turn off.
OFF= Selected wash temperature remains on for entire cycle.
ON= LEDs indicate actual water temperature during every fill step. LEDs will be off during
distribute and spin steps.
Infra-red Access This option determines if a Micro-Wand can access or program the Electronic Control.
OFF= Turns off the infra-red access by the Micro-Wand.
ON= Turns on the infra-red access by the Micro-Wand.
Decimal Point This option determines if a decimal point is used when displaying the vend price, (i.e.
machines using token currency may choose to remove the decimal point).
OFF= Turns off the decimal point from appearing in the VFD.
ON= Turns on the decimal point to appear in the VFD.
Heater Enable If the washer is equipped with an optional heater, this option will turn on the heater cycle.
OFF= Turns off the heater cycle.
ON= Turns on the heater cycle.