Alliance Laundry Systems HTE517, Programming Manual

Page: 15 / 79

800000
13
Section V
Electronic Control Special Features
Programming the Electronic Control
The Electronic Control allows the washer owner to
program the control with the use of the keypad. Audit,
diagnostic, cycle and vend information may be
programmed and retrieved by pressing combinations
of the Select Cycle and Select Wash Temp pads.
For details on programming cycle and vend
information, refer to “Programming the Electronic
Control,” Section VIII.
Collecting Audit Information
The control will store audit information in its memory
that can be retrieved by pressing various combinations
of Select Cycle and Select Wash Temp pads. The
Electronic Control will record coin vault openings,
coins entered, service door openings, total wash
cycles, special vend options, power failures and more.
For more information on the audit features, refer to
“Collecting Audit Information,” Section IX.
Testing Machine and Electronic
Control Functions
Special programmable diagnostic features built into
the Electronic Control allow the owner to test specific
information with the washer in and out of an active
cycle. By opening and closing the service door and
then pressing various sequences of Select Cycle and
Select Wash Temp pads, the owner may perform the
following tests:
• Coin Vault Opening Test
• Service Door Opening Test
• Coin Drop Input Test
• Door Switch Test
• Door Lock Test
• Show Fill Test
For detailed information on running diagnostic tests,
refer to “Testing Machine and Electronic Control
Functions,” Section X.
Sales Floor Feature
The Electronic Control washer has a built-in sales
floor routine used to display all LED lights, status
words, and the three digits with the colon and decimal
point. This function is designed to show potential
customers the high-tech features of the Electronic
Control.
For detailed information on using the Sales Floor
feature, refer to Section XI.
Rapid Advance Feature
This feature allows the user to quickly advance
through active cycles or advance into a cycle from the
default mode. This feature is useful when tests must be
performed immediately on a washer currently in an
active cycle. In this case, the user can quickly advance
through the cycles to the default mode. At this point,
the user can perform the required tests and then return
the washer to the point it was interrupted.
For detailed information on using the Rapid Advance
feature, refer to Section XII.
Clearing the Electronic Control
Vend Feature
This feature allows the user to return the Electronic
Control back to the default mode if coins have been
entered but the full vend price has not yet been
satisfied. See Figure 2.
For more information on using the Clear Vend feature,
refer to Section XIII.
Power Fail Recovery
This feature allows the cycle status to be saved in the
memory when the power fails.
For more information on using the Power Fail
Recovery feature, refer to Section XIV.
Infrared Communications
This feature allows the washer control to communicate
with the MicroWand IIIE. This allows the washer
control to be programmed and have its data read
without using the keypad.
For more detailed information on using the Infrared
Communications feature, refer to Section XV.