Allen-Bradley PanelView Plus 2711P, User Manual, Page: 99 / 170

Publication 2711P-UM001B-EN-P
Installing and Replacing Components 5-9
Replacing the Display
Module
This sections shows how to replace the Display Module
(2711P-RDxxxx). It is necessary to remove the Communication
Module from the Logic Module to perform this operation.
1. Disconnect power from the terminal.
2. Remove terminal from panel.
3. Detach the Communication Module (if attached) from the Logic
Module by removing the 4 screws.
4. Loosen the 6 captive screws that attach the Logic Module to the
Display Module.
5. Carefully lift the Logic Module from the terminal.
6. Set the Display Module aside.
700 - 1500 Terminals Only
Communication Module
Display
Module
Logic Module
Logic Module
Captive screws
on top and bottom
AB Drives