Publication 2711P-UM001B-EN-P
4-8
Using Configuration Mode
To edit communication settings:
1.
From the RSLinx Configuration Screen, select the communication
card installed on your terminal.
2.
Select the
Driver Settings
button.
A properties screen opens showing the current communication
settings for the driver.
3.
To modify a setting, select the setting and then the
Edit
button.
The Input Panel opens showing the current setting.
4.
Using the Input Panel, modify the setting and then select the
Enter
button.
You return to the previous screen with the newly entered data.
To edit the device address of the logic controller:
1.
From the RSLinx Configuration screen, select a device node.
2.
Select the
Edit Device
button.
A screen opens showing the name of the device and its current
node address.
3.
To modify the device address, press the
Device Address
button.
The Input Panel opens showing the current address.
4.
Using the Input Panel, modify the address and then select the
Enter
button.
You return to the previous screen with the new address.
IMPORTANT
Modified settings do take effect until the terminal is
rebooted.
Summary of Contents for PanelView Plus 2711P
