Allegri PRATIK 30, Use And Maintenance Manual, Page: 6 / 59

6
PRATIK - Installation use and maintenance ENG- EDITION: 2018-07-05
CONTENT
1. 0. TECHNICAL DATA
1.1 DESCRIPTION OF THE LIFT
1.2 OVERALL DIMENSIONS
1.2.1 FOUNDATIONS SCHEME
1.2.2 FOUNDATIONS SCHEME INSIDE THE FLOOR
1.3 LOAD DISTRIBUTION
1.4 PICTOGRAMS
1.5 PICTOGRAMS APPLICATION DIAGRAM
1.6 HAZARDOUS AREAS
2. INTRODUCTION
2.1 EC CERTIFICATION
2.1.1 TESTING
3. GENERAL SAFETY AND ACCIDENT-PREVENTION PULES
3.1 SET-UP AND CLOTHING
3.2 ENVIRONMENT AND POLLUTION
3.3 LIFT DISPOSAL
3.4 DANGER LEVELS
3.5 HAZARDOUS AREAS
3.6 LIFT IDENTIFICATION AND PICTOGRAMS DESCRIPTION
3.7 INTENDED USE
4. INSTRUCTIONS FOR USE
4.1 PUSH-BUTTON PANEL
4.1.1 LIFT RISING
4.1.2 LIFT LOWERING
4.2 VEHICLE LIFTING PROCEDURE
4.3 VEHICLE LOWERING AND UNLOADING PROCEDURE
4.4 SAFETY DEVICES
4.5 EMERGENCY LOWERING
5. HANDLING AND INSTALLATION
5.1 TRANSPORT AND UNLOADING
5.2 FOUNDATIONS
5.3 LIFT POSITIONING
5.4 CONNECTING HYDRAULIC PIPES
5.5 ELECTRICAL CONNECTIONS
5.6 HYDRAULIC SYSTEM FILLING
5.6.1 FIRST INSTALLATION
5.7 COMPLETING THE INSTALLATION
5.7.1 DEFINITION OF DANGER AREA
5.7.2 AREAS AT RISK
5.8 OVERALL DIMENSIONS
5.9 HYDRAULIC CONNECTIONS WITH CONTROL UNIT POSITIONED RIGHT
5.9.1 HYDRAULIC CONNECTIONS WITH CONTROL UNIT POSITIONED LEFT
5.9.2 FIXING THE LIFT TO THE FLOOR
6. MAINTENANCE
6.1 SAFETY DEVICES CHECK
6.1.1 EMERGENCY DISCONNECTOR / OFF
6.1.2 VOLTAGE WARNING LIGHT
6.1.3 AUTOMATIC ALIGNMENT AND AIR BLEEDING
6.1.4 RUBBER PADS
6.2 PERIODICAL MAINTENANCE
6.2.1 EVERY WEEK
6.2.2 EVERY MONTH
6.2.3 EVERY 200 OPERATING HOURS OR EVERY 5 YEARS, AT LEAST
7. TROUBLESHOOTING
7.1 SPARE PARTS
8. HYDRAULIC SCHEME
8.1 WIRING DIAGRAM 230/400 V 3PH
8.3 CONTROL PANEL SCHEME
9. RESERVED TO THE TECHNICIAN INSTALLER
9.1 RESERVED TO THE USER
SPARE PARTS LIST