Allegri PRATIK 30, Use And Maintenance Manual

Page: 22 / 59

22
PRATIK - Installation use and maintenance ENG- EDITION: 2018-07-05
3.4
DANGER LEVELS
Pay special attention to the following danger sign when you find it in this manual, and follow the safety
recommendations. Danger signals have three levels:
DANGER : this signal warns that, if the described operations are not carried out correctly, they
cause severe injury, death or health long-term risks.
.
WARNING : this signal warns that, if the described operations are not carried out correctly, they
may cause severe injury, death or health long-term risks.
.
CAUTION : this signal warns that, if the described operations are not carried out correctly, they
may cause machine damage and/or personal injuries.
.
WARNING : carefully read the following rules; whoever does not put into practice the recommendations described
hereinafter may be subject to irreparable damages or cause them to people, animals or property. The Company
disclaims any and whatever liability arising from the failure to comply with the safety and accident-prevention rules
described hereinafter.
The Company also disclaims any liability for damages caused by lift improper use and/or due to changes made without
the manufacturer’s authorisation.
3.5
HAZARDOUS AREAS
• Before using the lift, make sure that no unauthorised people nor animals are present within the hazardous area
delimited by the yellow stripe (Fig. 6).
• People or animals shall by no means stop or pass within the hazardous area delimited by the yellow stripe (Fig.6),
when using the lift even for small movements, and whenever the Emergency Switch/OFF (10, Fig. 1) is not active.
• Figure 6 indicates the lift hazard areas for persons or animals. It is strictly forbidden to approach this area if the lift is
moving due to the hazard of all machine mobile parts.
3.6
LIFT IDENTIFICATION AND PICTOGRAMS DESCRIPTION
The safety signals (fig. 5) described in this manual are applied onto the lift (Fig. 6), and warn about unsafe and
hazardous situations.
Stickers shall be kept clean and, if detached or damaged, they shall be immediately changed.
Carefully read the meaning of the safety signals, and memorise it:
1 Runway P1
2 Runway P2
3 Warning. Possibility of a fall. Do not climb on the platforms
4
Warning risk of feet shearing
5
Warning risk of hands shearing
6 Instruction plate
7 Max load
8
CE
plate: Each lift is provided with identification tags (8 Fig. 7) relating to the different versions
9
Voltage presence
10 Logo manufacturer
Each lift is provided with identification tags (8 Fig. 7) relating to the various versions