Manual
SmartHandle AX
9 / 55
SimonsVoss
4 | Installation
4 Installation
You can programme the SmartHandle AX while it is still in the packaging
(except MP) and then install it.
You will also find information on installing the SmartHandle AX in the
accompanying quick guide.
4.1 Installation instructions
–
The batteries are already fitted.
–
Do not touch electronics/components; do not allow them to come into
contact with oil, paint, moisture, alkali or acids.
–
Keep away from sources of interference, such as power supply units.
–
You must not strike the product while installing the cylinder.
–
Attach plan to the door. Do not install while bent or tensioned.
–
Use the supplied drilling template.
–
If required, fit the supplied dummy cylinder to comply with approval
requirements for FH variants.
–
Only undo the indicated screws.
4.2 Variant A0
4.2.1 Contents of packaging
Quantity
Object
1×
Outer fitting assembly, including:
4×
Battery (CR2450)
1×
Inlay
1×
Outside handle, including:
1×
Grub screw
1×
Inner handle, including:
1×
Grub screw
1×
Pre-installed escutcheon base
1×
Switching plate
1×
Spring element
2×
Escutcheon base for cylinder opening
1×
Escutcheon for inner handle
