Manual
SmartHandle AX
26 / 55
SimonsVoss
4 | Installation
5. Press the rear clip into the designated pawl.
ð
Spring contact is inserted.
Reposition bolts
(for DIN R only)
1. Undo the indicated screws.
2. Remove the cover plate.
3. Unscrew the stud bolts.
4. Fasten the stud bolts as indicated.
5. Insert the cover plate again.
6. Fasten the indicated screws again.
ð
Sub-assembly is designed for DIN R.
Insert spindle
IMPORTANT
If you use a 7 mm spindle, attach the adapter shoe to the spindle before fit-
ting the spindle.
–
Insert the spindle into the outer sub-assembly until the pin locks into the
spindle.
ð
Spindle is inserted.
Fit sub-assembly
1. Push the sub-assembly with the spindle into the door from the outer
side.
2. Position the escutcheon base for the cylinder opening on the other side
of the door.
3. Fasten the escutcheon base with the L1 screws (MO: fasten the
complete escutcheon base with the L1 screws).
IMPORTANT
If you use a 7 mm spindle, place the adapter sleeve on the free side of the
spindle.
4. Fasten the handle onto the sub-assembly with the L2 screws.
IMPORTANT
Press the handle downwards if there is not enough room.
5. Press the escutcheon onto the escutcheon base on the cylinder
opening until it locks into place.
6. Fasten the grub screw into the handle to affix it.
7. Slide the escutcheon along the handle and press the escutcheon onto
the escutcheon base until it locks into position.