Manual
SmartHandle AX
32 / 55
SimonsVoss
6 | Configuration
6.5 Flip flop
Pulse mode (default setting) is switched off and the pulse duration is no
longer in effect. When flip flop mode is activated, the SmartHandle changes
its status from engaged to disengaged or vice versa each time it is
activated using a transponder/SmartCard. This mode is suitable for
situations such as when a door needs to be used freely without a
transponder/SmartCard to allow visitors to enter, for instance
6.6 Close range mode
A reduced reader range is required in some situations. The near-field mode
reduces the reader range for transponders. This diminishes the impact of
possible interferences and prevents the transponder from overriding.
ü
LSM open.
1. Double-click on the SmartHandle AX entry in the matrix to open the
settings.
2. Change to the [Configuration/Data] tab.
3. Enable the Close-up range mode checkbox.
4. Click on the Apply button.
5. Click on the Exit button.
6. Execute programming (see ).
ð
Near-field mode is activated.
6.7 Time switch-over function
The fifth group in the time zone plan is relevant for time change-over.
IMPORTANT
These settings are only available in the .ZK version.
Assignment of a
time zone plan
ü
LSM open.
ü
Add time zone plan (see LSM manual).
1. Double-click on the SmartHandle AX entry in the matrix to open the
settings.
2. Change to the [Door] tab.
3. Open the Time zone drop-down menu.
4. Select your time zone.
5. Click on the Apply button.