14
SW-375 DC OPERATOR AND ARM DIMENSIONS
2”
B
OUTSIDE
INSIDE
POST
CONCRETE PAD
THIS DISTANCE IS FROM
THE GATE IN OPEN
POSITION TO EDGE OF
THE PAD. REFER TO
NOTE
ABOVE.
A
C
PRIMAR
Y
SECONDAR
Y
CENTER OF
HINGE
REFER TO
ABOVE
NOTE
D
MINIMUM
DISTANCE
Please refer to the chart and drawing below for operator and arm dimensions.
A: The distance between the center of the gate bracket and the center of the hinge point.
B: The distance between the gate hinge point and the edge of the operator concrete pad.
C: The distance from the gate in the open position to the center of the operator shaft.
D: The distance from the center of the gate hinge to the center of the operator shaft.
Minimum distance: The minimum distance required behind an open gate and an obstruction (ie: wall, bush, etc).
If this distance is between 20” and 33”, refer to the compact installation page.
GATE IN OPEN POSITION
NOTE:
The 2” distance shown above is from the gate in the open position (90 degrees) to the edge of the
concrete pad. If the gate must open more than 90 degrees, the concrete pad and distance “C” need to
move back accordingly. The distance between the open gate and the concrete pad needs to remain 2”.
SW-375 DC Dimensions Chart
Gate
length
A B C
Less than
12’
13’-15’
16’-22’
36”
52”
46”
58”
32”
42”
13”
13”
13”
38”
48”
44”
Minimum
Distance
37”
34”
40”
D
36VDC MANUAL (09.2020)
Monday, August 31, 2020 8:57:58 AM
