12
SL-175 DC GATE TRAVEL ADJUSTMENT
EACH NOTCH
EQUALS ABOUT
1/2” OF TRAVEL
LIMIT NUTS
LIMIT SWITCH
LIMIT NUT LOCK PLATE
Locate the limit switches and follow the steps below:
1: Turn the power
OFF
on the operator.
2: Push the limit lock plate outwards.
3: Turn the limit nut in the desired direction.
(Toward the switch to decrease travel and away from the switch to increase travel)
4: Place limit plate back to its locked position. (
MUST
be done for gate to hold its limits)
5: Turn the power
ON
on the operator.
6: Run the gate operator open and close. If additional adjustment is needed, repeat the steps.
36VDC MANUAL (09.2020)
Monday, August 31, 2020 8:57:57 AM
