21
SW-375 DC GATE TRAVEL ADJUSTMENT
.
After locating the limit switches and identifying which one is open and close, follow the steps below to adjust the
gate travel:
1. Turn the power OFF on the gate operator.
2. Use an allen wrench to loosen up the limit cams. Turn the limit cams in the desired direction.
3. Tighten the allen screw.
4. Turn the power ON on the gate operator.
5. Run the gate operator.
6. Repeat the steps if more adjustment is needed.
ALLEN WRENCH
LIMIT CAMS
LIMIT SWITCHES
36VDC MANUAL (09.2020)
Monday, August 31, 2020 8:58:02 AM
