Alienware Sentia 3450 Technical Reference
30
Media Warning
Don’t try to remove a floppy disk/CD/DVD while the system is accessing it. This may
cause the system to “crash”.
Changing DVD Regional Codes
Go to the
Control Panel
and double-click
System > Hardware
(tab), click
Device
Manager
, then click the + next to
DVD/CD-ROM
drives. Double-click on the DVD-ROM
device to bring up the Properties dialogue box, and select the
DVD Region
(tab) to
bring up the control panel to allow you to adjust the regional code (see “DVD Regional
Codes” on pages 2-5).
DVD region detection is device dependent, not OS-dependent. You can select your
module’s region code 5 times. The fifth selection is permanent. This cannot be altered
even if you change your operating system or you use the module in another computer.
