Alienware Area-51 Threadripper Edition R7, Service Manual

Page: 66 / 140

Removing the wireless card
WARNING: Before working inside your computer, read the safety information that shipped with your computer and
follow the steps in Before working inside your computer . After working inside your computer, follow the instructions
in After working inside your computer . For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance .
Prerequisites
1 Remove the stability foot .
2 Remove the left and right side-panels. See “ Removing the side panels ”.
3 If you have multiple graphics cards installed, remove the graphics card. See “ Removing multiple graphics cards ”.
Procedure
1 Lay the chassis on the right side.
2 Locate the wireless card on the system board.
3 Remove the screw (M2x3) that secures the wireless card to the chassis.
4 Slide and remove the wireless card from the wireless-card slot.
5 Disconnect the antenna cables from the wireless card.
66