Alfa Romeo 4C 2016 Page 35 Owner'S Manual Download | Manualshive

Page: 35 / 369

background image

their seat belts. The Belt Alert feature is active when-
ever the ignition switch is in the AVV/START or
MAR/RUN position.

Initial Indication

If the driver is unbuckled when the ignition switch is first
turned to the AVV/START or MAR/RUN position, a
chime will signal for a few seconds. If the driver or
outboard front seat passenger (if equipped with outboard
front passenger seat BeltAlert) is unbuckled when the
ignition switch is first turned to the AVV/START or
MAR/ RUN position the Seat Belt Reminder Light will
turn on and remain on until both outboard front seat
belts are buckled. The outboard front passenger seat
BeltAlert is not active when the outboard front passenger
seat is unoccupied.

BeltAlert Warning Sequence

The BeltAlert warning sequence is activated when the
vehicle is moving above a specified vehicle speed range
and the driver or outboard front seat passenger is un-
buckled (the outboard front passenger seat BeltAlert is
not active when the outboard front passenger seat is
unoccupied). The BeltAlert warning sequence starts by
blinking the Seat Belt Reminder Light and sounding an
intermittent chime. Once the BeltAlert warning sequence
has completed, the Seat Belt Reminder Light will remain
on until the seat belts are buckled. The BeltAlert warning
sequence may repeat based on vehicle speed until the
driver and occupied outboard front seat passenger seat
belts are buckled. The driver should instruct all occu-
pants to buckle their seat belts.

Change Of Status

If the driver or outboard front seat passenger (if
equipped with outboard front passenger seat BeltAlert)

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

33

«
...
33
34
35
36
37
...
»

Summary of Contents for 4C 2016


















































































































































































































































































































































































Reviews:

No comments

Related manuals for 4C 2016

Brand: 3SIXT Pages: 12

Brand: Whispbar Pages: 16

Brand: Metra Electronics Pages: 12

Brand: Halfords Pages: 4

Brand: Phonocar Pages: 6

Brand: BMW Pages: 38

Brand: Toyota Pages: 600

Sedan CIVIC 2022

Brand: Honda Pages: 701

Brand: PUTCO Pages: 2

Brand: travall Pages: 4

Grand Cherokee SRT 2019

Brand: Jeep Pages: 656

Brand: true-i Pages: 11

Brand: Jaeger Pages: 11

Brand: ATS Pages: 12

transit connect 2012

Brand: Ford Pages: 299

Brand: Raider Pages: 2

COOPER Convertible

Brand: Mini Pages: 168

Brand: Octocam Pages: 35

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands