Alfa Romeo 4C 2016 Owner'S Manual Download Page 319

Page: 319 / 369

4. Rotate the bulb holder counterclockwise and remove

it.

5. Rotate the bulb assembly counter clockwise to remove

from bulb holder.

6. Install the new bulb, making sure that it is locked in

correctly, and reinstall into headlamp assembly.

7. Reinstall protective cover in the headlamp assembly

and close the protective flap.

Side:

1. Adjust the lens in the point shown in to compress the

retaining clip, then pull the cluster outwards.

2. Turn the bulb holder counterclockwise, remove the

bulb and replace it.

3. Install the bulb holder in the lens and turn it clock-

wise.

4. Install the cluster making sure that the internal clip

clicks into position.

Protective Cover

MAINTAINING YOUR VEHICLE

317

Summary of Contents for 4C 2016

















































































































































































































































































































































































Search results

Summary of Contents for 4C 2016

Reviews:

Alfa Romeo 4C 2016, Owner'S Manual, Page: 319 / 369

Search results

Summary of Contents for 4C 2016

Reviews: