Alfa Romeo 4C 2016 Page 168 Owner'S Manual Download | Manualshive

Page: 168 / 369

background image

Fast Demisting/Defrosting Of Windshield And
Side Windows

Proceed as follows:

1. Rotate the Temperature Control to the red section.

2. Turn the Blower Control to 4 (maximum fan speed).

3. Turn the Mode Control to

.

4. Move the Recirculation Control to

.

After demisting/defrosting, operate the controls as nor-
mal to restore the required comfort conditions.

NOTE:

The climate control system is very useful for

speeding up and maintaining demisting since it dehu-
midifies the air. Adjust the controls as described previ-
ously and switch on the climate control system by
pressing the A/C button.

Window Demisting

In the event of considerable external moisture and/or
rain and/or large differences in temperature inside and
outside the passenger compartment, perform the follow-
ing preventive window demisting procedure:

1. Move the Recirculation Control to

.

2. Rotate the Temperature Control to the red section.

3. Turn the Blower Control to 2 (intermediate fan speed).

4. Turn the Mode Control to

with the possibility of

moving it to position

if window misting does not

occur.

Ventilation

To ventilate the passenger compartment properly, pro-
ceed as follows:

1. Fully open the vents and direct them appropriately.

166

UNDERSTANDING YOUR INSTRUMENT PANEL

«
...
166
167
168
169
170
...
»

Summary of Contents for 4C 2016


















































































































































































































































































































































































Reviews:

No comments

Related manuals for 4C 2016

Brand: Jeep Pages: 603

Brand: Jeep Pages: 80

Brand: REVCAMUK Pages: 4

Brand: Nav TV Pages: 5

Ram Commercial2016

Brand: Dodge Pages: 675

Brand: Thule Pages: 8

Brand: Skoda Pages: 281

PRIME DESIGN VRR3-FT21G-ST

Brand: Safe Fleet Pages: 12

2013 2500 Big Horn

Brand: RAM Pages: 12

Brand: Bilstein Pages: 7

Brand: Phonocar Pages: 28

Brand: Porsche Pages: 146

Brand: Blue Ox Pages: 5

2011 RDX Navigation System

Brand: Acura Pages: 16

Powerbuilt 648601

Brand: AllTrade Pages: 3

SportQuest Series

Brand: Perrycraft Pages: 2

Hitch-Haul 30110315

Brand: Masterbuilt Pages: 2

Brand: Lincoln Pages: 364

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands