Alfa Romeo 4C 2016 Page 242 Owner'S Manual Download

Page: 242 / 369

3. Insert the fuel nozzle into the filler pipe (the nozzle

opens and holds the flap door while refueling) and
start refueling – when the fuel nozzle “clicks” or shuts
off, the fuel tank is full.

4. At the end of refueling, before removing the nozzle,

wait at least 10 seconds to allow the fuel to flow within
the tank.

5. Remove the fuel nozzle from the filler pipe and then

close the fuel door.

Emergency Gas Can Refueling:

Most gas cans will not open the flapper door.

A funnel is provided to open the flapper door to allow
emergency refueling with a gas can.

1. Retrieve the appropriate funnel from the storage area

in the luggage compartment.

2. Insert funnel into same filler pipe opening as the fuel

nozzle.

Fuel Nozzle Location

240

STARTING AND OPERATING

Summary of Contents for 4C 2016

















































































































































































































































































































































































Search results

Summary of Contents for 4C 2016

Reviews:

Related manuals for 4C 2016

Brands by name

Popular brands

Alfa Romeo 4C 2016, Owner'S Manual

Search results

Summary of Contents for 4C 2016

Reviews:

Related manuals for 4C 2016

Brands by name

Popular brands