Single PC wiring
MDI vs. MDIX hub
ports and the STHome
1 Speed Touch Installation Guide
19
/ 104
3EC 17058 AAAA TCZZA Ed. 04
Using a hub you can connect multiple PCs to your
STHome
:
10 BaseT
MDIX
Hub
MDI
MDI
MDI
MDIX
In the above figure an MDIX port on the hub connects to the
STHome
. Therefore, a crossover LAN cable is used.
Note
: In case the hub's uplink" port is used to wire the
STHome
you can use
the included straightthrough LAN cable.
Cascading Repeating Hubs
You may cascade up to four repeating hubs in your LAN
(limitations of Repeating Ethernet V2.0/IEEE802.3 hubs). In case
more hubs need to be cascaded, you must use switching hubs.
10BaseT Half Duplex Interfacing
Make sure the 10BaseT port(s) of your PC(s) are configured for
either Auto Negotiation or Half Duplex.
Never configure the 10BaseT Ports for FullDuplex !
CAUTION
CAUTION
All manuals and user guides at all-guides.com