Introduction
The PingofLife
procedure
9 Maintenance - Speed Touch ToDefaults
74
/ 104
3EC 17058 AAAA TCZZA Ed. 04
9.1
PingofLife
The
STHome
offers a unique method to supply an IP address to
the
STHome
's Ethernet port.
This method, the
PingofLife
,
allows to provide the
STHome
with an IP address without affecting other configurational settings.
IP Addresses and Subnet Masks
Make sure that the intended
STHome
IP address and your PC
share the same IP (sub)network.
If not, the ping will be submitted with the MAC address of the
default router instead of the special MAC group address.
Proceed as follows:
1.
Turn off the
STHome
.
2.
Open a commandline (DOS) window (Windows OS), or a
terminal window (UNIX, Linux) on a PC.
3.
At the command prompt execute:
arp –a
This allows you to overview the current entries in the ARP
cache.
4.
Add a static entry to the ARP cache, according to following
syntax:
arp –s <STHome IP address> 01–90–D0–80–01–01
<STHome IP address>
is a placeholder for the IP address
to be assigned to the
STHome
. It can be any address within
your subnet as long as it is not used by any other member of
your local network.
5.
To verify whether this step was successful execute
arp –a
a
second time.
In the entries list, your
arp –s
command entry should be
added.
6.
Initiate a continuous pinging, by executing following
command:
ping –t <STHome IP address>
7.
Turn on the
STHome
.
CAUTION
All manuals and user guides at all-guides.com
