Bridging configuration
Using Bridging
Detailed packet service
use description
2 Speed Touch Configuration Guide
29
/ 104
3EC 17058 AAAA TCZZA Ed. 04
2.3.3
Transparent Bridging Packet Service Configuration
Per default, following Bridging entry is preconfigured:
Br1
(Bridge on 8.35)
In case this Bridging entry does not meet your requirements, you
can configure a new one as follows:
1.
If needed, add a Bridging phonebook entry with the correct
VPI/VCI on the
'Phonebook'
page.
2.
On the '
Bridge
' page, select this phonebook entry from the
'
Bridge Port'
popdown list.
3.
For this entry, select the correct encapsulation method.
4.
Click
and
to finish the procedure.
Make sure your
STHome
is turned on first.
Turn on your PC(s), start your Web browser and you are on the
Internet.
Although the access method of the bridge is 'Alwayson', the
remote organization might ask for a user name and password.
Transparent Bridging and DHCP
If the SP requires you to use DHCP on your local PC(s), you must
disable the
STHome
DHCP server.
This is to avoid conflicts between two DHCP servers.
For more information on the configuration and use of the Bridging
packet service, see chapter 3.
CAUTION
All manuals and user guides at all-guides.com
