STHome access
Accessing the STHome
2 Speed Touch Configuration Guide
25
/ 104
3EC 17058 AAAA TCZZA Ed. 04
2.3.1
STHome Web Interface Access
The
STHome
features well chosen defaults. Therefore, in most
cases no additional configuration is needed for immediate Internet
connectivity.
In exceptional cases additional or advanced configurations are
desired, the
STHome
offers a userfriendly web interface.
Note
: You can also configure the
STHome
through its Command Line
Interface (CLI), accessible via a Telnet session.
Proceed as follows:
1.
Start the Web browser on your PC.
2.
Contact the
STHome
by entering one of the following:
The
STHome
IP address (default 10.0.0.138)
The
STHome
DNS hostname (default SpeedTouch.lan).
3.
In case the
STHome
is protected by a System Password an
authentication window will pop up.
Enter the system password in the
'Password'
field.
4.
As a result the
'Welcome to the World of DSL'
page pops up:
All manuals and user guides at all-guides.com
