Setting an IP address
via the 'Initial Setup'
page
Sample configuration:
single PC
6 Networking Services - IP, DHCP and DNS
60
/ 104
3EC 17058 AAAA TCZZA Ed. 04
Proceed as follows:
1.
Click
in the left pane of the
STHome
pages to pop
up the
'Initial Setup'
page:
2.
Enter an IP address in the
'IP Address'
field.
3.
Enter a netmask for applying subnetting in your network in the
'Subnetmask'
field.
4.
Click
. As a result the new IP settings are applied:
5.
To verify connectivity, point your Web browser to the new IP
address. Make sure though that your PC shares the same
subnet.
6.
Click
to store the applied IP settings to permanent
storage.
In the below figure, a simple configuration is given: One PC
attached to the
STHome
:
IP Network 10
IP address : 10.0.0.138
(Sub)netmask : 255.255.0.0
Default Gateway : none
IP address : 10.0.0.1
(Sub)netmask : 255.255.0.0
Default Gateway : none
All manuals and user guides at all-guides.com
