Configuring the
STHome for Auto DHCP
DHCP server
configuration
6 Networking Services - IP, DHCP and DNS
63
/ 104
3EC 17058 AAAA TCZZA Ed. 04
One of the
STHome
features is that it can automatically revert
from DHCP client to DHCP server.
At boot time the
STHome
probes the LAN for a specified time
limit (
'Client timeout'
) to check whether another DHCP server is
available on the network. If so, it will act as a DHCP client. If no
response is received within the specified time, the
STHome
becomes a DHCP server.
To allow the
STHome
to act as Auto DHCP client/server, tick
.
Additionally, you can configure the '
Client timeout'
in seconds:
.
Via the '
DHCP server configuration'
tables, you can configure the
STHome
DHCP server settings.
Click
on the
'DHCP'
page to pop up the
'DHCP server
configuration
' page.
You can configure following DHCP server parameters:
Field
This configures ...
Default
Addresses
through ...
The range of addresses the DHCP server can
choose an IP address from for lease.
Net10"
Subnet Mask
The subnetting applied to the local network,
scoped by the DHCP server.
no
subnetting
Lease Time
The time (Lease Time) IP addresses can be
assigned to a device by DHCP.
7200
seconds
Default
Gateway
The IP address of the default gateway.
'auto'
(*)
DNS Server
The IP address of the DNS server.
'auto'
(**)
(*) Setting
'auto'
in the
'Def. Gateway'
field means, that there will be referred to
the
'Routing'
page.
(**) Setting
'auto'
in the
'DNS server'
field means, that there will be referred to
the
'DNS'
page.
All manuals and user guides at all-guides.com
