Introduction
Procedure
Note
9 Maintenance - Speed Touch ToDefaults
78
/ 104
3EC 17058 AAAA TCZZA Ed. 04
9.2.2
PingtoDefaults
A second software method to reset all settings to the original
defaults is the
PingtoDefaults
.
The technique is identical to that used for the
PingofLife
, except
that another MAC address is used, i.e.
01–90–D0–80–01–FF
.
Proceed as follows:
1.
Turn off the
STHome
.
2.
Open a commandline (DOS) window (Windows OS), or a
terminal window (UNIX, Linux) on a PC.
3.
Add a static entry to the ARP cache, according to following
syntax:
arp –s <any IP address> 01–90–D0–80–01–FF
<any IP address>
can be any address within your subnet
as long as it is not used by any other member of your local
network.
4.
To verify whether this step was successful execute
arp –a
5.
Initiate a continuous pinging, by executing following
command:
ping –t <any IP address>
6.
Turn on the
STHome
.
7.
After the
STHome
finished its POST, it will perform a reset to
default settings.
8.
You must clear the entry in the ARP cache by issuing
the following command:
arp –d <any IP address>
9.
If needed, reconfigure the
STHome
IP address, e.g. via a
PingofLife
.
The used
<any IP address>
to perform a
PingtoDefaults
is not
assimilated by your
STHome
. The
STHome
will restart with the
original defaults, including the default IP address 10.0.0.38.
All manuals and user guides at all-guides.com
