Introduction
Procedure
9 Maintenance - Speed Touch ToDefaults
79
/ 104
3EC 17058 AAAA TCZZA Ed. 04
9.2.3
SwitchtoDefaults
At the back of the
STHome
there is a small push button labeled
"Defaults".
Via this button a hardware reset of the
STHome
, the
SwitchtoDefaults
, is possible.
Proceed as follows:
1.
Make sure your
STHome
is turned on.
2.
Use a pencil to press the push button at the back of the
STHome
.
3.
Release the button. Via the flashing front panel LEDs, you will
notice that the
STHome
will reboot.
Wait to allow the POST to end. The
STHome
will come online
with manufacturing defaults.
4.
After a reset to original defaults a reconfiguration of
STHome
's IP address might be necessary. This because the
reset to defaults also resets your
STHome
's IP address to its
default value 10.0.0.138.
All manuals and user guides at all-guides.com
