Managing CMM Directory Content
Managing Redundancy in a Stack
OmniSwitch 6600 Family Switch Management Guide
April 2006
page 4-27
To synchronize the secondary CMM to the primary CMM, enter the following command at the prompt:
->copy flash-synchro
command is described in detail in the
OmniSwitch CLI Reference Guide
.
Note.
When synchronizing the primary and secondary CMMs, it is important to remember that the
boot.params
file and the switch date and time are not automatically synchronized. See the
OmniSwitch
6600 Family Getting Started Guide
for information on the
boot.params
for information on setting the switch date and time. The date and time are synchronized
using the
command.
Synchronizing the System Date and Time
To synchronize the system date and time, use the
command. This
command synchronizes the secondary CMM date and time to the primary CMM date and time.
Enter the command as shown:
-> system time-and-date synchro
