Managing Switch User Accounts
Overview of User Accounts
OmniSwitch 6600 Family Switch Management Guide
April 2006
page 7-5
Quick Steps for Network Administrator User Accounts
1
Configure the user with the relevant username and password. For example, to create a user called
thomas
with a password of
pubs
, enter the following:
-> user thomas password techpubs
For information about creating a user and setting up a password, see
2
Configure the user privileges (and SNMP access) if the user should have privileges that are different
than those set up for the
default
user account. For example:
-> user thomas read-write domain-network ip-helper telnet
For information about the default user settings, see the next section. For information about setting up priv-
ileges, see
“Configuring Privileges for a User” on page 7-11
Note. Optional
. To verify the user account, enter the
show user
command. The display is similar to the
following:
User name = admin
Read Only for domains
= None,
Read/Write for domains
= All ,
Snmp not allowed
User name = public
Read Only for domains
= None,
Read/Write for domains
= All ,
Snmp authentication
= NONE, Snmp encryption = NONE
User name = thomas
Read Only for domains
= None,
Read/Write for domains
= Network ,
Read/Write for families
= telnet ip-helper ,
Snmp not allowed
User name = default
Read Only for domains
= None,
Read/Write for domains
= None,
Snmp not allowed
For more information about the
show user
command, see the
OmniSwitch CLI Reference Guide
.
