Using WebView
WebView CLI Commands
OmniSwitch 6600 Family Switch Management Guide
April 2006
page 9-3
WebView CLI Commands
The following configuration options can be performed using the CLI. These configuration options are also
available in WebView.
Enabling/Disabling WebView
WebView is enabled on the switch by default. If necessary, use the
command to enable
WebView. For example:
-> http server
Use the
no http server
command to disable WebView on the switch. If web management is disabled, you
will not be able to access the switch using WebView. Use the
command to view WebView
status.
Enabling/Disabling SSL
Force SSL is disabled by default. Use the
command to enable Force SSL on the switch. For exam-
ple:
-> http ssl
Use the
no http ssl
command to disable Force SSL on the switch. Use the
show http
command to view
WebView status.
