Installing the 7750 SR-12
7750 SR-12
Page 51
R
ACK
M
OUNTING
THE
C
HASSIS
The 7750 SR-12 router is designed for front and middle-mount installation into a 19-inch rack. The
rack mounting hardware (including rack bolts) is factory installed to front-mount the chassis in a
19-inch rack.
Required tools:
•
Use a screwdriver to loosen and tighten the mounting bracket bolts.
Before you begin, verify:
•
The equipment rack is securely installed, anchored, and grounded. Refer to the rack
manufacturer’s documentation for instructions.
•
Any power to the rack is OFF.
Danger:
• Only trained and qualified personnel should install or replace this chassis and chassis
components.
Caution:
• There are no handles or hand grips on the 7750 SR-12. Lift the router from underneath. Do
not lift the router by the internal chassis frame.
• When rack mounting the 7750 SR-12 in an equipment rack, do not stack other 7750 SR-12
units or any other equipment directly on top (where the bottom unit is supporting other
devices). Each unit must be secured into the rack with the appropriate mounting apparatus.
Summary of Contents for 7750 SR-12
