Alcatel 7750 SR-12, Installation Manual

Page: 97 / 158

Installing the SF/CPM
7750 SR-12
Page 95
T
ELNET
C
ONNECTION
Access the router after a successful initialization with a Telnet connection from a PC or
workstation connected to the network after the management port (
Figure 31 ) has been configured
using the
bof>address
command (see below). Telnet access provides the same options for user
and administrator access as those available through the console port.
To configure the 7750 SR-12 for Telnet access, you need to have a device with Telnet software
located on the same network. The SR-12 must have a management IP address. The IP address is
manually configured. For information about configuring router parameters, refer to the IP Router
Configuration Overview chapter. For pinout information, refer to
Appendix C: Pinout Assignments
on page 149 .
MAC addresses are listed on a small label on the chassis, IOM, and MDA. The MAC address also
displays in the
show router arp
command output.
Figure 31: Management Port Connection
CLI Syntax:
bof cflash-id
address ip-addr/mask [primary|secondary]
The SR-12 must have a management IP address. The IP address is manually configured.
SR40028
Mgmt Port