Albrecht DB 275, Manual

Page: 78 / 184

It may be a method to ask for help when outgoing for some activities, but not usually among radio
amateurs. It is better to save Call as
“
CURREN
”ΝΥνΝdisplayΝreadingΝforΝ“
current frequency
”
) instead
of channel 01, because then it can be better used to open repeaters as described already.
4.5 FM broadcast radio listening
1. Press and hold [MONITOR/FM] for more than 2 seconds to enter FM Broadcast mode.
2. Press [UP] or [DOWN] to adjust the broadcast frequency (Range 87.0
～
108.0MHz,
with 100KHZ steps). Long press [UP]or [DOWN] to choose frequency.
3. Press [MONITOR/FM] again for more than 2 seconds to exit FM broadcast mode.

You can keep the 2 way radio working in the background when still in FM broadcast receive
mode: If an incoming signal is detected on your communication radio channel, the broadcast
radio will be interrupted.

Under broadcast radio mode: Press MR to enter storing up to 16 broadcast radio channels
FM broadcast radio scanning & storing

Under FM mode, press [MENU] ,then [MR] button to scan the whole frequency range

Start from the current frequency: Press [UP] to scan from low to high or press [DOWN] to
scan from high to low .

Scanner stops at the next frequency with a signal is detected.

Press [UP] or [DOWN] to keep scanning ,or press others buttons to quit.