3.8 SHIFT (Dir / - / OFF)
Shift direction concerns transmitter in relation to receiving frequency. + means TX is higher than
receiver, - means TX is lower than receiver. European repeaters always use
–
for the shift direction.
1. Press [MENU], [MENU] appears, next line is blank. Then press [UP] or [DOWN] to select
“
SHIFT
”έ
2.
θressΝ[εEζU]ΝenterΝintoΝsettingΝ,firstΝlineΝisΝ“SώIόT”,
next line shows the status
3. Press [UP] or [DOWN] to select between OFF /+ /-.
4. Press [MENU] to confirm settings and return, or press [*/BAND] to exit without changes.
Note :
OFF
means same frequency for transmitting and receiving.
+
means transmitting frequency
higher than receiving frequency;
-
means transmitting frequency lower than receiving frequency.
Example:
In the 2 m VHF band
–
shift has been selected. 145.775 MHz appears as receiving
frequency. When pressing PTT, the radio will then transmit on 145.175 MHz as corresponding TX
frequency.
Summary of Contents for DB 275
Page 1: ...ALBRECHT DB 275 Dualband Amateurfunk Transceiver Bedienungsanleitung ...
Page 45: ...ALBRECHT DB 275 Duoband Amateur Transceiver Manual ...
Page 88: ......
Page 89: ...ALBRECHT DB 275 Dualband Amateur Transceiver Guide d utilisation ...
